Grain conveyor elevator failure, how to deal with quickly

2024-03-06 16:47:23

Grain conveying elevator is an indispensable kind of integrated farmland machinery, which is widely used because of its characteristics of fast conveying speed, safety and reliability. However, in use, we will inevitably encounter problems. This article will introduce you in detail from the causes of the failure, solutions and preventive measures to help you quickly solve the problem of the failure of the grain conveyor elevator.

Common causes of failure are as follows:

1. Electrical failure: mainly including electrical system failure, switch box terminal burned out, etc., will cause the machine can not start or can not run normally after starting.

2. Mechanical failure: mainly including sprocket, chain loosening or wear, belt aging fracture, etc., will lead to the machine can not operate normally or even loss of logistics.

3. Hydraulic failure: mainly including oil pump, hydraulic motor, valve failure, etc., will lead to the machine can not operate normally.

The above three kinds of faults may be encountered in use, but the solution is different, and the specific treatment method needs to be determined according to the cause of the fault. It is important to resolve these failures because once they occur, they will directly affect agricultural production efficiency.

How to quickly deal with the failure of grain conveyor elevator? The following are the solutions for different fault situations:

1. Electrical failure:

When an electrical fault is found, we first need to check whether the power supply is normal, and then check whether the electric control system is connected correctly. If the connection line fails, we need to replace or repair it.

2. Mechanical failure:

When mechanical failure is found, we need to first check the sprocket, chain loose or wear, if the sprocket wear, need to be replaced or repaired; If the chain is loose, you need to add a pulley or adjust the chain tightness. If the belt ages and breaks, a new belt needs to be replaced.

3. Hydraulic failure:

When a hydraulic fault is found, we need to first check whether there is a fault in the oil pump, hydraulic motor, valve, etc., if there is a fault, it needs to be replaced or repaired.

Preventive measures:

1. Regular maintenance and inspection, timely clean the fuselage dust and dirt.

2. When using, pay attention to the use of the machine and the size of the noise, and deal with abnormal situations in time.

3. Pay attention to safety when using food conveyor elevator to avoid unnecessary injury caused by unexpected situations.