What problems should we pay attention to when using conveyor belt?

2024-03-06 16:35:46

Conveyor belt is used in many places, and some places will continue to specify several conveyor belt work together, that degree in the control of conveyor belt when paying attention to what, we have a look at it:

1. When several conveyor belts are used to coordinate the delivery of raw materials or a certain type of process flow, the industrial base control table should be set for centralized control.

2. The control of the conveyor network belt line must ensure that the function and posture of the transmission system are accurate and firm, and the safety of the switch power supply will be shut down in the desperate case.

3. The conveyor network belt industrial base control console must set the starting and stopping conditions of acoustic and optical signal emergence and the accident power switch position of the machine equipment for the completion of accurate control.

4 The Belt conveyor in the conveyor belt should start by machine according to the direction of the inverse flow of raw materials. Stop machine by machine when the direction of raw material flow is transported. It is also allowed to start or brake the system together on the premise of ensuring that there is no overflow

5 The machine and equipment in the conveyor belt must be interlocked, and when a conveyor belt conveyor shows shortcomings and stops, the conveyor belt upstream and downstream of the material flow should be stopped immediately. Interlocked machines block arbitrary modification or logout.

6. The conveyor belt or the conveyor belt applied in the narrow and not wide area of the safety channel should be set up along the coast of the wire switch. Conveyor belt is used in many places, and some places will continue to provide for several conveyor belt work together, then what to pay attention to when controlling conveyor belt, let's take a look at it:

1. When several conveyor belts are used to coordinate the delivery of raw materials or a certain type of process flow, the industrial base control table should be set for centralized control.

2. The control of the conveyor network belt line must ensure that the function and posture of the transmission system are accurate and firm, and the safety of the switch power supply will be shut down in the desperate case.

3. The conveyor network belt industrial base control console must set the starting and stopping conditions of acoustic and optical signal emergence and the accident power switch position of the machine equipment for the completion of accurate control.

4 The mesh conveyor in the conveyor mesh belt should be directed against the flow of raw materials, and the transport orientation should be started by machine. Stop machine by machine when the direction of raw material flow is transported. It is also allowed to start or brake the system together on the premise of ensuring that there is no overflow.

5. The machine equipment in the conveyor belt must be interlocked, and when a certain conveyor belt conveyor shows shortcomings and stops, the conveyor belt upstream and downstream of the material flow should be stopped immediately. 6. The conveyor belt or the conveyor belt applied in the small and not wide areas of the safety channel should be set up along the coast of the wire switch.